KUSHULENTERPRISES 5858e9f8b40a780a242d8ccc
{ "_id": "59a579c33872838dbcda0ea8", "merchant_name": "pappu gaur", "bank_name": "icici bank", "bank_acc_num": "269205500248", "ifsc_code": "ICIC0002692", "bank_account_type": "Current", "pan_card": "ARMPG2828D", "gstn": "33ARMPG2828D1Z3", "merchant_id": "5858e9f8b40a780a242d8ccc", "fptag": "KUSHULENTERPRISES", "phone_number": "9884177503", "email": "kushalenterprises2007@gmail.com", "delivery_type": 1, "payment_type": 1, "userid": "58ede4d4ee786c1604f6c535", "actionid": "591c0696ee786da6a48705a6", "websiteid": "KUSHULENTERPRISES", "createdon": "2017-08-29T14:27:15.06Z", "updatedon": "2017-08-29T14:27:15.06Z", "isarchived": false } 1 1
False 253 14
OK
background image not found
Found results for
'install ceramic tile'
PolyGlaze Tile Grout INR   100 INR  100
-0%

PolyGlaze Tile Grout

“PolyGlaze Tile Grout” is a white cement-based, polymermodified grout that produces hard dense joints that are resistant to shrinkage and cracking and can be used to fill tile joints on walls and floors with a minimum width of 1mm to a maximum width of 12 mm for both interior and exterior applications. Special Properties of “PolyGlaze Tile Grout”: Wide joint bridging. Good Water resistance – can be used both indoor and outdoor tile grouting. Excellent workability, smooth and easy to spread and easy clean-up. Exceptional color stability. Non-shrinking and high stain resistance. Being Polymer modified it enhances durability and helps to achieve a more robust, waterproof and flexible grout finish. Areas of use : “Polyglaze Tile Grout can be used in conjunction with Polyglaze Tile Adhesive (although not necessary) for grouting all types of Ceramic & Vitrified tiles, Mosaics, Porcelain, Quarry tiles, Bricks, Pavers, Slate and Natural stones. It may be used for interior and exterior- Floor, Wall and Ceilings. Being water resistant, Polyglaze Tile Grout can also be used for grouting wet areas like Swimming pools, power shower enclosures, etc. Surface Preparation : Ensure the tile adhesive has fully set before grouting. The surface should be clean, dry and free from dust, grease, oil, loose materials, adhesive residue and other contaminates. If required, clean the surface with a damp cloth or sponge. It is advisable to moisten the joints before applying the grout so as to assist the spread of the grout. Preparation of “PolyGlaze Tile Grout”: Take a small amount of water in a bucket and gradually add “Polyglaze Tile Grout”. Mix thoroughly in the ratio of approximately 3 parts of the product to 1 part of water by volume till a smooth paste is obtained. No further water should be added after final mixing. After proper mixing, leave the paste for 5-10 minutes for polymeric dispersion before application. Protect the paste from direct sunlight, heat and use within 45 minutes of preparation. Application of “PolyGlaze Tile Grout”: After grout is mixed, use a rubber bottomed grout float to scoop the grout from the bucket. Then completely fill the tile joints with “Polyglaze Tile Grout” with the aid of a rubber grouting trowel diagonally without leaving any void or gaps. Work in small areas at a time. Remove excess grout from the surface as the work proceeds by drawing the float diagonally across the joints. When grouting external areas, protect during and after application. For Initial cleaning, allow 15 minutes for the grout to firm up before cleaning off excess with a damp sponge, rinsing the sponge frequently in between with water. The Final cleaning of the residual grout film on the surface of the tiles can be done using a clean dry cloth for buffing and polishing the tiles. Do’s about “PolyGlaze Tile Grout”: Ensure 24 hours time interval for grouting after tile fixing. For light traffic flow areas, allow grout to set for approximately 12 hours For best results, use spacers and keep a minimum of 2mm joints between the tiles. Don’ts about “PolyGlaze Tile Grout”: Don’t add too much water, it will weaken the grout. Don’t leave any excess moisture on the surface of the grout joints which may cause efflorescence on drying. Useful Tips : “Polyglaze Tile Grout” should be stored in a dry place. Keep out of reach of the children. Avoid inhalation of dust. In case of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately. Color: “PolyGlaze Tile Grout” is available in choice of various colors. For details, please refer our shade card. Coverage : Approximate Coverage per 10 Kg.bag of “PolyGlaze Tile Grout” Tile Size 600x600x8mm 300x300x6mm 300x200x6mm 200x150x5mm 150x150x4mm 100x100x3mm Approx coverage 160 105 85 75 80 72 Note: Quantities shown are approximate and are given for estimating purposes only. Actual job site coverage’s may vary. It is always a good practice when calculating coverage to allow for 10-15% additional material for wastage and spillage. Technical Information: “PolyGlaze Tile Grout” PRODUCT INFORMATION FORM Dry powder STANDARD COLOUR White (Refer Shade Card for Color Options) PACKAGING 1 Kg & 500 gms Pouch STORAGE CONDITIONS Store in a dry place SHELF LIFE 6 months in unopened manufacturer’s packaging APPLICATION INFORMATION MIX PROPORTIONS 25 – 30% by weight POT LIFE Approx. 45 minutes TIME TO TRAFFIC Allow grout to set for 24 hours PERFORMANCE INFORMATION COMPRESSIVE STRENGTH > 4 N/mm2 after 7 Days FLEXURAL STRENGTH > 3 N/mm2 after 7 Days

INR 100 INR 100

Availability:True

Pay mode:COD only

view details
Dimond Star White Adhesive 20Kg INR   950 INR  950
-0%

Dimond Star White Adhesive 20Kg

Description White (Glass Mosaic Adhesive) or Grey (Industrial Adhesive) cement - based, highly polymer modified, high strength, flexible tile adhesive for fixing vitrified tiles and glass mosaics in interior and exterior situations. Suitable for walls and floors. Features Grey - Industrial Adhesive White - Glass Mosaic Adhesive Highly polymer modified High strength Flexible tile adhesive For interior and exterior situations Non-slip and water-resistance Technical Specification DIAMOND STAR @ 27 ± 1oC Bed Thickness 2 - 6 mm (1), (2) Walls* Use Thin-bed Trowel (Dry wall areas) Floors* *Suitability depends on surface level/flatness Use Thick-bed Trowel (Floor areas) Mixing Ratio (p.b.w = Parts by weight) 1 p.b.w. Water to 4 p.b.w. Adhesive Open Time 15 - 20 minutes Pot Life 3 hours Setting Time 24 hours Temperature Resistance -30oC to 150oC NOTE: (1) Up to 12mm in areas of limited extent. (2) Use thick-bed trowel for floor tiling. Coverage Estimates Pack size Coverage Grey:20kg White:20kg & 5kg approximately 3kg/m2 @ 3mm thickness when using a thin-bed trowel NOTE: Coverage will depend on the nature and flatness of the surface and the method of application. For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations. Storage and Shelf Life DIAMOND STAR has a shelf life of 12 months when stored in normal dry conditions.

INR 950 INR 950

Availability:True

Pay mode:COD only

view details
Silvar Star Plus Adhesive Grey 26Kg INR   650 INR  650
-0%

Silvar Star Plus Adhesive Grey 26Kg

Description Grey, polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. For exterior applications and more difficult and demanding situations eg: vitrified tiles, glass mosaics, external cladding, swimming pools, etc. consult ARDEX ENDURA regarding use of a higher performance adhesive. Features Polymer modified adhesive Easy mixing & application Good strength Suitable for fixing ceramic tiles for floor & walls Interior situations Technical Specification SILVER STAR @ 27 ± 1oC Bed Thickness 3 - 6 mm (1), (2) Walls* Use Thin-bed Trowel (Dry wall areas) Floors* *Suitability depends on surface level / flatness Use Thick-bed Trowel (Floor areas) Mixing Ratio (p.b.w = Parts by weight) 1 p.b.w. Water to 4 p.b.w. Adhesive Open Time 10 - 15 minutes Pot Life 3 hours Setting Time 24 hours Temperature Resistance -30oC to 150oC NOTE: (1) Up to 12mm in areas of limited extent. (2) Use thick-bed trowel for floor tiling. Coverage Estimates Pack Size Coverage 20kg approximately 3.5kg/m2 @ 3 mm thickness when using a thin-bed trowel NOTE: Coverage will depend on the nature and flatness of the surfaces and the method of application. For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations. Storage and Shelf Life SILVER STAR has a shelf life of 12 months when stored in normal dry conditions

INR 650 INR 650

Availability:True

Pay mode:COD only

view details
Poly Glaze Back Coat ( Water Base Stain & Water Mark Repellent Stone ) INR   1100 INR  1100
-0%

Poly Glaze Back Coat ( Water Base Stain & Water Mark Repellent Stone )

Polyglaze Back Coat is water base lm forming cum impregnator for protection of polished or rough marble, granite and natural stone from mortar stain as well as water marks. Compatible on humid or damp surface, therefore saving time during application process. TILE & STONE CARE SOLUTIONS INDEX POLYGLAZE SEALER 1 POLYGLAZE SALT WATER SEALER 2 POLYGLAZE BACK COAT 3 POLYGLAZE IMPREGNATOR (WB) 4 POLYGLAZE WETLOOK 5 POLYGLAZE WHITENER 6 POLYGLAZE ACIDIC CLEANER 7 POLYGLAZE NATURAL CLEANER 8 POLYGLAZE POLISH CLEANER 9 POLYGLAZE TILE & CONCRETE CLEANER 10 POLYGLAZE SCALE REMOVER 11 POLYGLAZE EGFR 12 WARRANTIES & DISCLAIMER 13 SEALER TM SEALER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 12-13 (5% in water) 1 ltr, 10 ltr 1 ltr - 10/15 sq.mt. 12 months in unopened condition Advantages: Ecological UV stable Good resistance Excellent stain proof property Good resistance against atmospheric Condition Suitable Surface: Sand stone Terra cotta Natural stone Vertical surface 1 PolyGlaze Sealer is a ecological formulation which protects stones from moisture and general natural stain such as mud, mildew and atmospherical changes. The anti stain action is due to its technologically advance formation and provides protection deep inside the stone pores for long period of time. PolyGlaze Sealer does not change natural aspect of the stone surface and does not create any type of lm or plastic effect while allowing vapour to escape and is UV resistant. Apply second coat when rst coat is wet SALT WATER SEALER TM SALT WATER SEALER Aspect Color pH Pack Size Coverage Storage Life solvent liquid colorless n/a 1 ltr 1 ltr - 15/20 sq.mt. 12 months in unopened condition Advantages: Salt Resistance Anti Stain UV stable Non yellowing Suitable Surface: Ceramic tiles Vitried tiles Marble Granite 2 PolyGlaze Salt Water Sealer protects tiles, marble, granite or any natural stone from salt which is present in water. The water/dirt repellent action is due to its technologically advance formation, protecting deep inside the surface for a long period of time. It will not create any lm or change the natural color Apply PolyGlaze Salt Water Sealer BACK COAT TM BACK COAT SEALER Suitable Surface: Marble Granite Natural stone Advantages: Prevent good resistance against mortar stain Easy to apply Good bond with cement mortar Penetrating cum lm forming Natural look remain intact Aspect liquid Color milky white pH 7 (5% in water) Pack Size 1 ltr Coverage 1 ltr - 10/15 sq.mt. Storage Life 12 months in unopened condition 3 Polyglaze Back Coat is water base lm forming cum impregnator for protection of polished or rough marble, granite and natural stone from mortar stain as well as water marks. Compatible on humid or damp surface, therefore saving time during application process. IMPREGNATOR (WB) TM IMPREGNATOR Aspect Color pH Pack Size Coverage Storage Life waterbase liquid colorless 7 (5% in water) 1 ltr 1 ltr - 20/25 sq.mt. 12 months in unopened condition Advantages: Anti stain Enhancing Ecological Durable Stain repellency Suitable Surface: Internal or external marble Granite Natural stone Engineered stone 4 WETLOOK TM WETLOOK Aspect Color pH Pack Size Coverage Storage Life Advantages: Glossy enhance effect Anti stain Non yellowing Suitable Surface: Textured marble Flame granite Hond marble Sand stone Slate stone solvent liquid transparent n/a 1 ltr 1 ltr - 4/6 sq.mt. 12 months in unopened condition UV resistance 5 WHITENER TM WHITENER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 3-4 (5% in water) 1 ltr 1 ltr - 10/15 sq.mt. 12 months in unopened condition Advantages: Fast acting Powerful High cleaning power Suitable Surface: Marble Granite 6 Apply PolyGlaze Whitener & cover it with cotton cloth ACIDIC CLEANER TM ACIDIC CLEANER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 2-3 (5% in water) 1 ltr 1 ltr - 10/15 sq.mt. 12 months in unopened condition Advantages: Powerful detergent formula Easy cleaning Economical Suitable Surface: Any type of tiles RCC 7 Apply PolyGlaze Acidic Cleaner & leave it for 2-3 min NATURAL CLEANER TM NATURAL CLEANER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 7 1 ltr n/a 12 months in unopened condition Advantages: Excellent cleaning property Very low douse (20-50 gm/ltr) Versatile Easy cleaning of dirt Clean supercial layer easily Suitable Surface: Natural stone Pocelain stone Ceramic Quartz 8 POLISH CLEANER TM POLISH CLEANER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 7 (5% in water) 1 ltr 1 ltr - 10/30 sq.mt. 12 months in unopened condition Advantages: Excellent cleaning property Rapid Heavy Cleaning effect Powerful on tiles Suitable Surface:: All Natural stone Tile Quartz Terra Cotta 9 TILE & CONCRETE CLEANER TM TILE & CONCRETE CLEANER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 2-3 (5% in water) 1 ltr 1 ltr - 10/30 sq.mt. 12 months in unopened condition Advantages: Excellent cleaning property Rapid Heavy cleaning effect Powerful on tiles Suitable Surface: Terra cotta tiles Ceramic tiles RCC 10 PolyGlaze Tile & Concrete Cleaner is an acidic base detergent for the removal of cement residue, yellow stain without damaging the surface aspect or joint. Apply PolyGlaze Tile & Concrete Cleaner & leave it for 2-3min SCALE REMOVER TM SCALE REMOVER Aspect Color pH Pack Size Coverage Storage Life liquid transparent 2-3 (5% in water) 1 ltr 1 ltr - 10/30 sq.mt. 12 months in unopened condition Advantages: Excellent cleaning Rapid Easy cleaning of the tough stain Suitable Surface:: Sand stone Honed stone Quartz agglomerates Ceramic Terra cotta tiles Polish/rough granite All surface resistance to acid 11 Apply PolyGlaze Scale Remover & leave it for 2-3 min EGFR TM EPOXY GROUT FILM REMOVAL Aspect Color pH Pack Size Coverage Storage Life liquid transparent 7 (5% in water) 1 ltr 1 ltr - 10/30 sq.mt. 12 months in unopened condition Advantages: Powerful Heavy duty Rapid action Good cleaning Suitable Surface: All natural stone Tile Quartz Terra cotta Glass mosaic 12 Apply PolyGlaze EGFR & leave it for 2-3 min 13 WARRANTIES The recommendations, suggestions, statements and technical data provided by the company on the current data sheet are based on the best current knowledge available and are given for information purposes only without any responsibility for their use. The company supplies products that comply with the properties shown on the current datasheets. In the unlikely event the products supplied are proved not to comply with these properties, company will replace the complaint product. The company does not warrant or guarantee the installation of the products, as it does not have control over the installation or end use of the products. Any suspected defects must be reported to the company in writing within ve working days of being detected. The company makes no warranty as to the merchantability or tness for a particular purpose and this warranty is in lieu of all other warranties express or implied. It is expressly understood and agreed that the buyer’s sole and exclusive remedy shall be replacement of defective products and under no circumstances shall the company be liable for incidental or consequential damages. The company shall not be liable for damages or any sort including remote or consequential damages, down time or delay loss of prot, the cost of removing and reinstalling material and any other liability the purchaser may have with respect to any other person. DISCLAIMER The above expressed Warranty for the product shall be exclusive Warranty and company makes no other Warranties express or implied. The company expressly disclaims any implied Warranties of merchantability and/or implied Warranties of tness for a particular purpose. The company has not authorized any person to make or give any other warranties or representation oral or written on its behalf. Rev. 1

INR 1100 INR 1100

Availability:True

Pay mode:COD only

view details
LATICRETE 252 Ag SILVER THIN-SET ADHESIVE INR   0 INR  0
-NaN%

LATICRETE 252 Ag SILVER THIN-SET ADHESIVE

LATICRETE® 252 Ag SILVER Thin-set Adhesive PRODUCT DESCRIPTION LATICRETE® 252 Ag Silver thinset adhesive is a multipurpose, polymer modified thinset powder offering vast utility including applications on interior floor & wall as well as limited exterior* floor & wall installations. It is a cementitious thinset powder to be mixed only with water to install various types of tiles & stone on variety of substrates using thinset method of installation. Application Designed especially for interior floor and wall as well as limited exterior * floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, porcelain, glass mosaic tiles, precast terrazzo, engineered stone and natural stones over concrete and a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna and wash rooms *Contact MYK LATICRETE technical services for exterior area applications Advantages • Single component, just add water • High strength, polymer modified • Economical & Easy to use • Bonds to various substrates • Exceeds ANSI A118.4 shear bond strength requirements • Complies to EN with a C2 E T classification • Water and shock resistant. Suitable Substrates • Concrete • Concrete Masonry • Cement Mortar Beds • Cement Plaster • Tile and Stone • Brick Masonry • Cement Backer Board** • Cement Terrazzo • Exterior Grade Plywood*** • Gypsum Wallboard*** **Consult the backer board manufacturer’s data sheet for the specific recommendations. ***Interior use only and when mixed with LATICRETE® 333 Super Flexible Latex admix. Packaging – 5 kg & 20 kg bags Colour: Grey and white Coverage Approx 55-60 sft per 20kg bag with 1/4” x 1/4” (6mm x 6mm) square notched trowel for a bed of 3mm. Coverage will vary depending on trowel notch size, type and size of tile and substrate Shelf Life Factory sealed bags of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area. *High humidity will reduce the shelf life of bagged product. Limitations •Not for use directly over particle board, luan, Masonite or hardwood floors. •Not for use over VAT, VCT cutback, vinyl and plastic laminates. •Use white mortar for white or light colored marble/stone. •Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not designed as replacements for waterproof membranes. When a waterproofing barrier is required, use LATICRETE® Waterproofing Membrane. • NOTE: Surfaces must be structurally sound, stable and rigid enough to support tile/stone, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length. NOTE TO THE SPECIFIER AND INSTALLER: • While installing tile/stone on the external walls and floors, we need to provide the movement joints by creating spaces between the tiles/stones and filling them up with LATICRETE® cement based grout mixed with L1776 grout admix plus or silicone sealants. • It is also important to note that the exterior tile / stone installations are provided with joints (spaces) on the periphery of the area without allowing the tile / stone to be bound by the peripheral masonry work or plaster. • It is also important to note that the tiles/stones are not installed directly on expansion joints. The expansion joints need to be run through the tile / stone work till top surface and filled with materials which accommodate the movements. • While installing tiles / stones on dry wall boards like Gypsum wall boards, calcium silicate boards and Cement backer boards, it is recommended to use LATICRETE® latex admix such as Laticrete 3642 latex admix as a primer coat (should have been applied 8 to 10 hours before installation of tiles). • No tile shall be installed on the joints of two adjacent dry wall boards and the joint of two boards shall be brought through to the top of the tile / stone, which shall be filled with a silicone sealant / highly flexible joint filler to accommodate the movements between the dry wall boards. Cautions • During cold weather, protect finished work from traffic until fully cured. • For installation of moisture sensitive stones and engineered stones, please contact supplier / manufacturer of stones for specific installation guidelines. • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water. • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas. • Keep out of reach of children. TECHNICAL DATA Applicable Standard ANSI A118.4-1999; EN 12004 & ISO 13007 Performance Properties LATICRETE® 252 Ag Silver Adhesive mixed with Water Test Test Method Results Shear Bond, Porcelain Tile, 28 day cure ANSI A118.4-1999; F-5.2.4 >300 psi (2.0 MPa) Shear Bond, Porcelain Tile, Water Immersion ANSI A118.4-1999; F-5.2.3 >190 psi (1.3 MPa) Compressive Strength ANSI A118.4-1999; F-6.1 >2750 psi (18.9 MPa) Complies to EN & ISO standards: C2TE Working Properties at 70° F (21° C) LATICRETE 252 Ag Silver Adhesive mixed with Water Open Time Approx 20 minutes Pot Life Approx 4 hours Time to Heavy Traffic 16 - 24 hours Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions. INSTALLATION Surface Preparation All surfaces should be between 40° F(4° C) and 90° F(32° C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Rough or uneven concrete surfaces should be made smooth with LATICRETE® Latex Portland Cement underlayment to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28* days old before application. *No minimum cure time for concrete slabs when thin-set mortar is mixed with latex additive. All slabs must be plumb and true to within ¼”(6mm) in 10 ft(3m). Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Follow ANSI Specification AN-3.8 “Requirements for Expansion Joints” or TCA Detail EJ171 “Expansion Joints”. Do not cover expansion joints with mortar. Cement Backer Board: follow TCA installation details W244. 1. Installer must verify that deflection under all live, dead and impact loads of interior plywood floors does not exceed industry standards of L/360 for ceramic tile and brick or L/480 for stone installations where L=span length; 2. Minimum construction for interior plywood floors: SUBFLOOR: 5/8” (15mm) thick exterior grade plywood, either plain with all sheet edges blocked or tongue and groove, over bridged joints spaced 16” (400 mm) o.c. maximum; fasten plywood 6” (150mm) o.c. along sheet ends and 8” (200mm) o.c. along intermediate supports with 8d ring-shank, coated or hot dip galvanized nails (or screws); allow 1/8” (3mm) between sheet ends and ¼” (6mm) between sheets edges; all sheet ends must be supported by a framing member; glue sheets to joints with construction adhesive; UNDERLAYMENT: 5/8” (15mm) thick exterior grade plywood fastened 6” (150mm) o.c. along sheet ends and 8” (200mm) o.c. in the panel field (both directions) with 8d ring-shank, coated or hot dip galvanized nails (or screws); allow 1/8” (3mm) to ¼” (6mm) between sheets and ¼” (6mm) between sheet edges and any abutting surfaces; offset underlayment joints from joints in subfloor and stagger joints between sheet ends; glue underlayment to subfloor with construction adhesive. Mixing Place clean, potable water / LATICRETE® latex admix into a clean pail. Add LATICRETE® 252 powder into the pail. Use approximately 5 - 6L of water / LATICRETE® latex admix for 20 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. * Contact MYK LATICRETE technical services for exterior installations Application a) Installation of Tile/Stone: Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to insure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive. b) Installation of Glass Mosaic tiles: The LATICRETE®252 adhesive shall be applied to the surface to be tiled with a notched trowel using a scraping motion to work the adhesive into good contact with the surface to be covered. Notch trowel with notches approximately 4mm is recommended to get a bed thickness of 1.5-2mm. V-notch of 3mm also can be used to get bed thickness of 1.5mm. Apply only so much that can be covered with tile within 10- 15 min or while the adhesive surface is still tacky. The Glass Mosaic tiles shall then be set in place and beaten gently with mallet or grouting float to insure 100% full bedding. Tiles shall be aligned to achieve uniform joints and then allowed to set until firm. The face of the sheets of front mounted glass mosaic tiles shall then be dampened and the face mount paper can be removed. Excess adhesive must be cleaned from the surface of the tile with a wet cloth or sponge while the adhesive is fresh and has not hardened. Grouting Grout installation shall be done after a minimum of 24 hours curing time at 70°F (21° C). In case of LATICRETE® latex admix mixed with adhesive, Grout installation shall be done after a minimum of 48 hours of curing time at 70°F (21° C). Grout with LATICRETE® Sanded or Un-sanded Grout mixed with LATICRETE® 1776 Grout Admix Plus. For maximum stain resistance of Internal applications, use SpectraLOCK® Pro Premium Grout OR LATAPOXY SP-100 Stainfree Grout. Cold Weather Note: The setting of Portland cement adhesives and grouts are retarded by low temperatures. Protect finished work for an extended period when installing in cold weather. For faster setting adhesive use Xtrabond FSA 336, Fast Set adhesive OR LATICRETE® 73 (Rapid) Crete Admix with LATICRETE® 111 Crete filler powder. Do not set tile when surface temperature is below freezing or when substrate is frozen. Hot Weather Note: The evaporation of moisture in Portland cement adhesives and grouts is accelerated by hot, dry conditions. Apply to dampened surfaces and protect freshly spread adhesive and finished work when installing in temperatures over 95°F (35°C). Cleaning Clean tools and tile work with wet towel or wet sponge while adhesive is fresh. AVAILABILITY AND COST Availability LATICRETE® and LATAPOXY® materials are available worldwide. For distributor information: Telephone: +91-40-30413100 FAX: +91-40-23378784 E-mail: contact@myklaticrete.com Cost Contact a MYK LATICRETE® Distributor in your area. MAINTENANCE LATICRETE® and LATAPOXY® grouts require routine cleaning with neutral pH soap and water or MYK LATICRETE Clenza series suitable cleaners. All other LATICRETE® and LATAPOXY® materials require no maintenance but proper installation as per instruction. Performance and durability may depend on properly maintaining of Installed area. WARRANTY MYK LATICRETE India Pvt Ltd warrants that LATICRETE® 252 Ag Silver adhesive is free from manufacturing defects and will not break down, deteriorate or disintegrate under normal usage for a period of one (1) year from manufacturing of the product subject to the terms and conditions stated in MYK LATICRETE® Product War

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
PolyGlaze XT – Flex Grey INR   1350 INR  1350
-0%

PolyGlaze XT – Flex Grey

“PolyGlaze XT – Flex (Grey/White)” is a multipurpose cementitious ready-mix powder, which is thin-bed and a high tensile polymer modified product. Its unique properties make it ideal for fixing tiles & natural stones like granite, marble on plywood, metal surface and wall cladding. Special Properties of “PolyGlaze XT - Flex”: Ready to mix, single component product. Preparation is simple, just add water. Although cement based, requires no curing. It can be used in damp areas. Very high tensile adhesion strength. It is suitable for heavy duty application with moderate structural movements. It is suitable for fibre cement boards, wooden floor for both interior and exteriar surfaces. Grouting is possible on the same day. Polymer modified formulation enhances its durability. Being ready to use, the product saves considerable time and labour. Areas of Use: To fix wall and floor tiles, natural stones like granite, marble on seasoned wood, metal surface, heavy duty applications like wall cladding at vertical surface. Cementitious screeds. Cement Mortar beds. Bathrooms and kitchens. Fixing the facades. Swimming pools. Surface Preparation : The surface should be clean, dry, and free from dust, grease / oil and other contaminates. Concrete Floors and Walls : Allow at least 4 weeks for concrete to cure prior to tiling. Screeds must be 5-7 days old and properly cured. The surface should be properly leveled for best results of “PolyGlaze XT – Flex”. Remove curing compounds, if any, from the surface. Existing Tiles: Existing tiles must be roughened mechanically with wire brush. Painted Surfaces: Oil-based paint should be removed by roughening mechanically and loose flaking paint should be removed completely. Allow the surface to dry after cleaning. Fibre Cement Sheets: Fibre cement sheets must be primed with water and all joints must be taped with PVC duct tape and fixed according to the manufacturer’s instructions. Preparation of “PolyGlaze XT - Flex”: Take a small amount of water in a bucket and gradually add “PolyGlaze XT – Flex” in it. Mix the product with water in the ratio of approximately 1:4. Mixing can be done manually or by stirrer. Mixing to be done till homogenous lump free mix is obtained. After proper mixing, leave the paste for 5-10 minutes for polymeric dispersion before application. The paste should be kept away from direct sunlight, heat and used within 30 minutes of preparation (after mixing with water). Do’s about “PolyGlaze XT - Flex”: Before fixing the tiles, natural stones etc., clean the backsides of these with wet cloth to remove all dust particles. Apply a layer of adhesive on the substrate and spread it by notch trowel. Lay the tiles/stones and press firmly. Then knock properly with rubber hammer in order to spread the adhesive equally and for a good contact. Remove any surplus adhesive on the face of the tiles. Any adjustment should be done within 15-20 minutes and before adhesive starts hardening. Wait for at least 12 hours before grouting for better contact. Don’ts about “PolyGlaze XT - Flex”: Avoid very high speed mixing when electric mixing equipments are used. Coverage : 50 – 60 sq.ft per 20 Kg. bag with notch trowel for a bed of 3 – 4 mm thickness. Please note that coverage will depend upon the undulation of base substrate and thickness of material used. Useful Tips : “PolyGlaze XT – Flex” should be stored in a dry place. It is recommended that when fixing tiles, a minimum spacing of 3mm should be left around each tile. Excess adhesive should be removed using a damp sponge or cloth before material has set. Floors will be ready to receive light foot traffic after 24 hours and can be put into full use after 72 hours. Although “PolyGlaze XT – Flex” is non-hazardous, following precautions should be adhered: Keep out of reach of the children. Avoid inhalation of dust. In case of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately. Technical Information: “PolyGlaze XT - Flex” PRODUCT INFORMATION FORM Dry powder STANDARD COLOUR Grey / White PACKAGING 20 Kg PP Bags STORAGE CONDITIONS Store in a dry place SHELF LIFE 6 months in unopened manufacturer’s packaging APPLICATION INFORMATION MIX PROPORTIONS 20-25% by weight POT LIFE Approx. 30 minutes OPEN TIME 15 – 20 minutes BED THICKNESS 3 – 4 mm TIME TO TRAFFIC Grout after 12 hours; light foot traffic after 24 hours; Full traffic after 48hours (depending on site conditions) COVERAGE 60 – 70 sq.ft/ 20 kg bag @ 3 – 4mm thickness PERFORMANCE INFORMATION TENSILE ADHESION STRENGTH Approx>2 N/mm2 after 28 days SELF CURING Yes, no additional curing is required

INR 1350 INR 1350

Availability:True

Pay mode:COD only

view details
Myk Laticrete Grouts INR   90 INR  90
-0%

Myk Laticrete Grouts

Grouts are tile joint fillers for the space between adjoining tiles laid either on the floor or walls. Traditionally, and even at most sites today, tiling is done by placing tiles close to each other without using grouts. Traditionally white cement is used to fill the tile joints. White cement easily breaks down due to daily maintenance which leads to dirty/ stained tile joints, water seepage and growth of fungus/ bacteria. To overcome these problems, MYK LATICRETE has introduced an innovative range of grouts which provide stainfree tile joints, are acid/ chemical resistant, non- cracking or powdering, anti- fungal & anti- bacterial Advantages Easy to apply Stainfree tile joints Non- cracking or powdering Anti- fungal & anti- bacterial Available in range of 40 colours to suit your tile colour Acid/ chemical resistant (epoxy based grouts only)

INR 90 INR 90

Availability:True

Pay mode:COD only

view details
PolyGlaze Tile Adhesive – XT INR   0 INR  0
-NaN%

PolyGlaze Tile Adhesive – XT

“PolyGlaze Tile Adhesive – XT” is a cementitious readymix powder which is thin-bed and a high tensile polymer modified product. Its unique properties make it ideal for fixing ceramic tiles / vitrified tiles /mosaic tiles / natural stones like granite, marble etc., to most building substrates. Special Properties of “PolyGlaze Tile Adhesive - XT” : Preparation is simple, just add water. Although cement based, requires no curing. It can be used in damp areas. High tensile adhesion strength. Grouting is possible on the same day. Polymer modified formulation enhances its durability. Being ready to use, the product saves considerable time and labour. Areas of Use: To fix wall and floor tiles, natural stones like granite, marble etc. Cementitious screeds. Cement Mortar beds. Bathrooms and kitchens. Fixing the facades. Swimming pools. Surface Preparation : The surface should be clean, dry, and free from dust, grease / oil and other contaminates. Concrete Floors and Walls : Allow 3 – 4 weeks for concrete to cure prior to tiling. Screeds must be 5 – 7 days old and properly cured. The surface should be properly leveled for best results of “PolyGlaze Tile Adhesive – XT”. Remove curing compounds, if any, from the surface. Existing Tiles: Existing tiles must be roughened mechanically with wire brush. Painted Surfaces: Oil-based paint should be removed by roughening mechanically and loose flaking paint should be removed completely. Allow the surface to dry after cleaning. Fibre Cement Sheets: Fibre cement sheets must be primed with water and all joints must be taped with PVC duct tape and fixed according to the manufacturer’s instructions. Preparation of “PolyGlaze Tile Adhesive - XT”: Take a small amount of water in a bucket and gradually add “PolyGlaze Tile Adhesive – XT” in it. Mix the product with water in the ratio of approximately 1:4. Mixing can be done manually or by stirrer. Mixing to be done till homogenous lump free mix is obtained. After proper mixing, leave the paste for 5-10 minutes for polymeric dispersion before application. The paste should be kept away from direct sunlight, heat and used within 45 minutes of preparation (after mixing with water). Do’s about “PolyGlaze Tile Adhesive - XT”: Before fixing the tiles, natural stones etc., clean the backsides of these with wet cloth to remove all dust particles. Apply a layer of adhesive on the substrate and spread it by notch trowel. Lay the tiles/stones and press firmly. Then knock properly with rubber hammer in order to spread the adhesive equally and for a good contact. Remove any surplus adhesive on the face of the tiles. Any adjustment should be done within 20 – 30 minutes and before adhesive starts hardening. Wait for at least 12 hours before grouting for better contact. Don’ts about “PolyGlaze Tile Adhesive - XT”: Avoid very high speed mixing when electric mixing equipments are used. Useful Tips : “PolyGlaze Tile Adhesive – XT” should be stored in a dry place. It is recommended that when fixing tiles, a minimum spacing of 3mm should be left round each tile. Excess adhesive should be removed using a damp sponge or cloth before material has set. Floors will be ready to receive light foot traffic after 24 hours and can be put into full use after 72 hours. Although “PolyGlaze Tile Adhesive- XT” is non-hazardous, following precautions should be adhered: Keep out of reach of the children. Avoid inhalation of dust. In case of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately. Technical Information: “Polyglaze Tile Adhesive XT” PRODUCT INFORMATION FORM Dry powder STANDARD COLOUR Grey PACKAGING 20 Kg PP Bags STORAGE CONDITIONS Store in a dry place SHELF LIFE 6 months in unopened manufacturer’s packaging APPLICATION INFORMATION MIX PROPORTIONS 20-25% by weight POT LIFE Approx. 45 minutes OPEN TIME 20 – 30 minutes BED THICKNESS 3 – 4 mm TIME TO TRAFFIC Grout after 12 hours; light foot traffic after 24 hours; Full traffic after 48 hours (depending on site conditions) COVERAGE 60 – 70 sq.ft/ 20 kg bag @ 3 – 4mm thickness PERFORMANCE INFORMATION TENSILE ADHESION STRENGTH >1N/mm2 after 28 days SELF CURING Yes, no additional curing is required

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false